Low Amperage Draw - No Power Surge

This test shows a SIO 18 Pro which has an 80 AMP rating. The inlet water temperature was 65 degrees with a 50 degree rise to 115 degrees. The measured flow rate was 2.8 GPM

 

Low Amperage Draw - While running, the temperature remains within 1-2 degrees of the setting and the AMP draw remains consistent at approximately 48 AMPs, or roughly 60% of the maximum.

No Power Surge - When the unit is shut off and started again, the initial power level reaches a high of 54 AMPs and then settles back to 48 AMPs...no Power Surge!

Videos Best viewed in Full Screen